• About Us
  • Careers
  • Contact
  • Our Locations
Home > News & Events

S-E-A's VPM featured in Motoryacht Magazine

March 17, 2017

S-E-A’s own Vessel Performance Mapping System (VPM) was recently featured in the February 2017 edition of Power and Motoryacht Magazine. Highlighting the hard work and skilled minds of S-E-A engineers, the article penned by Captain Bill Pike details the VPM's components and describes some potential benefits of using this device to monitor vessel speed, performance, and quality.

 Click here to view the full article

S-E-A's Capabilities and Facilities on Full Display

November 14, 2016

On an afternoon packed with demonstrations and presentations, Columbus Business First was on hand to document S-E-A's 1st Industry Day, and recently featured the event as the lead story in their publication. Click the link below to read Business First's write-up, including pictures of the Durango Flambe, S-E-A's sled and more!

Click here to view the full article

©2016 - Columbus Business First. All rights reserved. Reprinted with permission.

The video to the right shows aerial footage from an S-E-A drone as the Automated Test Driver performs "Script S-E-A."

 

John Swanson Co-authors Article on 3D Scanning

October 25, 2016
John Swanson Co-authors Article on 3D Scanning

John Swanson, the Director of Animation and Imaging Sciences in S-E-A's Baltimore office, co-authored an article with Quentin Urquhart, Jr. of Irwin Fritchie Urquhart & Moore for DRI's magazine, For the Defense. The article discusses 3D scanning and how the technology can be used to create compelling trial exhibits.

Read the full article

Gary Heydinger Featured in Columbus CEO

October 01, 2016
Gary Heydinger Featured in Columbus CEO

Columbus CEO magazine interviewed Dr. Gary Heydinger, Director of Vehicle Dynamics at S-E-A, to discuss S-E-A's product testing and failure analysis capabilities.

Read the full article

S-E-A Medical Illustrator Featured in FTD Magazine

September 15, 2016
S-E-A Medical Illustrator Featured in FTD Magazine

Brandon Holt, S-E-A's Medical Illustrator, was featured in DRI's For the Defense magazine where he discusses the origins of medical illustration and how it has evolved.

Read the full article

A Retailer's Introduction to Candles and Candle Standards

August 04, 2016

What Makes a Good Candle?

S-E-A’s Chemical and Candle Laboratory Director, Bob Moss, presented on behalf of the National Candle Association to numerous retail organizations about the basics of candle composition and associated industry standards.  The webinar (see link below) discusses various candle components and reveals how these components ultimately contribute to the fuel.  The concept of a “quality” candle is then evaluated from the point of view of the consumer, retailer and manufacturer.  Bob also reviews the current ASTM standards for candles, warning labels, containers and accessories.  He closes with a discussion on candle failures he has seen in the lab and the importance of retailer/manufacturer communication with regard to testing protocols.

Click here to listen to the webinar.

Arson and NFPA 921: Guide for Fire and Explosion Investigations

July 28, 2016
Arson and NFPA 921: Guide for Fire and Explosion Investigations

In an article published by In-House Defense Quarterly, Randy Watson provides a brief and candid history of the investigation of arson related cases and the impact of NFPA 921. Randy is a senior fire investigator, training coordinator, and branch manager at S-E-A, and the current chairman of the NFPA Technical Committee on Fire Investigations.

Click here to view the article.

S-E-A Settled into New Headquarters

June 14, 2016
S-E-A Settled into New Headquarters

After years of planning, the new S-E-A Columbus and corporate campus is open for business.  The impressive new facility at 7001 Buffalo Parkway sits on a 48-acre site next to the Anheuser-Busch brewery.  The new four-building and testing campus boasts over 100,000 sq. ft. stretching across 13 acres. Occupying a prime sight location near I-71 and I-270, the new facility and adjacent land allow the company to better serve the legal, manufacturing and insurance industries through professional testing and analysis.

A central additive to the new facility is an array of progressive vehicle testing grounds, which include a 70,000 sq. ft. outdoor asphalt vehicle test pad, an off-road vehicle course, an earthen hill with various grades, and a rollover test pit. These new details will be used to better test a variety of vehicles and equipment on an elevated scale. Additionally, the facility houses an updated test sled facility that is considerably longer (at least 50%) than the previous version, enabling higher-speed testing and better control of the sled motion.

The campus also boasts expanded chemical and materials laboratories and candle testing facility, many exam rooms, and private bays for confidential testing on behalf of clients.

 

New Research Campus Will Bolster S-E-As Onsite Automotive Testing Capabilities

July 01, 2015

Automotive Testing Technology International describes vehicle-related additions to S-E-A’s new headquarters. An asphalt vehicle test pad, off-road vehicle course, earthen hill, rollover test pits, and a longer sled facility will enable S-E-A to offer a multitude of vehicle tests from the comfort of its own property.

Click here to view the full article.